Mastering EPLAN - Course on Electrical Engineering Design

[dkmdkm]

Free Download Mastering EPLAN - Course on Electrical Engineering Design
Published 10/2024
Created by Tebogo Letlhogonolo Mashwabi
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 40 Lectures ( 15h 38m ) | Size: 11.5 GB

A Complete Guide to Electrical Design and Automation Using EPLAN Software
What you'll learn
Apply real-world case studies to enhance learning and problem-solving skills.
Gain proficiency in using EPLAN software for electrical system design.
Create detailed electrical schematics, ground schematics, network schematics and electrical panel layouts.
Select appropriate electrical devices and optimize communication between network devices.
Manage electrical project from creation to completion.
Generate accurate documentation, material lists, and reports.
Requirements
Basic knowledge of electrical engineering principles
Familiarity with electrical schematic design and industrial automation concepts
Description
The course offers a exclusive perspective to analyzing customer design scope (case study). In this course you will be able to review the documents which the customer can supplies you with to enable you to complete your designs. We will use Siemens Simaris Curves to conduct proper circuit breaker selectivity / discrimination. Cable design calculation will also be conducted to ensure that cables selected are accurate for the system. Heat and weight calculation is also another part of the course design work. The course also offers you the opportunity to learn and selecting appropriate electrical devices for system, designing, integrating and finally documenting a project successfully.This course is created for individuals seeking to advance their skills not only in the usage of EPLAN, but also in being a great electrical design engineer.Upon completion of this course, participants will be able to confidently use EPLAN software to design, document, and manage electrical systems, thereby improving their efficiency and effectiveness in professional settings. You will be enable to confidently conduct network configuration and ground schematics.Participants will also receive a certificate of completion, showcasing their proficiency in EPLAN to current and future employers.Join us to master EPLAN and take your electrical design skills to the next level!Please note that NF Click Robots is not a real company; the instructor made up the name.
Who this course is for
Electrical and hardware engineers
Automation and controls engineers
Professionals involved in the design and implementation of electrical and automation systems
Homepage

Bitte Anmelden oder Registrieren um Code Inhalt zu sehen!

Screenshot







Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live

Bitte Anmelden oder Registrieren um Code Inhalt zu sehen!

No Password - Links are Interchangeable

 

[0dayddl]

11.56 GB | 00:53:32 | mp4 | 1280X720 | 16:9
Genre:eLearning |Language:English​

Files Included :

Spoiler

1 -Introduction to the course (86.04 MB)
2 -Review "real world" case study (customer's scope) (155.6 MB)
3 -Overview of EPLAN (292.93 MB)
4 -Creating a new EPLAN project and filling in project details (122.44 MB)
5 -Creating and using workspaces (143.25 MB)
1 -Creating EPLAN structures (339.44 MB)
2 -Page types (186.45 MB)
3 -Using Navigators (324.73 MB)
4 -Parts Management (407.21 MB)
5 -Layer Management (207.07 MB)
1 -Creating plot frame (693.98 MB)
2 -Creating cover page (310.19 MB)
3 -Creating designation page (362.56 MB)
4 -Creating color specification page (267.88 MB)
5 -Creating enclosure label (427.38 MB)
1 -Adding edz files (167.13 MB)
2 -Creating part edz file (356.71 MB)
3 -Selecting appropriate devices for specific applications (270.99 MB)
4 -Cable design - part 1 (295.93 MB)
5 -Cable design - part 2 (386.49 MB)
6 -Circuit breaker selectivity (trip curves) (212.87 MB)
7 -Creating network configuration schematics (467.39 MB)
8 -Developing ground schematics (62.35 MB)
1 -Creating electrical schematics for the power enclosure (multi-line) - part 1 (427.62 MB)
2 -Creating electrical schematics for the power enclosure (multi-line) - part 2 (415.34 MB)
3 -Creating electrical schematics for the power enclosure (multi-line) - part 3 (197.86 MB)
4 -Creating electrical schematics for the power enclosure (multi-line) - part 4 (361.81 MB)
5 -Creating electrical schematics for the power enclosure (multi-line) - part 5 (279.06 MB)
6 -Creating electrical schematics for the power enclosure (multi-line) - part 6 (233.49 MB)
7 -Creating enclosure in 2D - part 1 (300.84 MB)
8 -Creating enclosure in 2D - part 2 (379.59 MB)
9 -Creating enclosure in 2D - part 3 (435.65 MB)
1 -Heat calculation - part 1 (309.98 MB)
2 -Heat calculation - part 2 (309.71 MB)
3 -Weight calculation (196.41 MB)
1 -Creating enclosure door label (151.47 MB)
2 -Generating reports (e g , table of content, part list, cable overview and etc ) (407.31 MB)
3 -Backing up project and restoring project (184.83 MB)
4 -Exporting project to PDF (149.2 MB)
5 -Making comments in EPLAN (285.73 MB)

]
Screenshot

Spoiler

Fikper

Bitte Anmelden oder Registrieren um Code Inhalt zu sehen!

FileAxa

Bitte Anmelden oder Registrieren um Code Inhalt zu sehen!

RapidGator

Bitte Anmelden oder Registrieren um Code Inhalt zu sehen!

TurboBit

Bitte Anmelden oder Registrieren um Code Inhalt zu sehen!

 

[0dayddl]

15.92 GB | 53min 32s | mp4 | 1280X720 | 16:9
Genre:eLearning |Language:English​

Files Included :

Spoiler

1 -Introduction to the course.mp4 (86.04 MB)
2 -Review "real world" case study (customer's scope).mp4 (155.6 MB)
3 -Overview of EPLAN.mp4 (292.93 MB)
4 -Creating a new EPLAN project and filling in project details.mp4 (122.44 MB)
5 -Creating and using workspaces.mp4 (143.25 MB)
1 -Creating EPLAN structures.mp4 (339.44 MB)
2 -Page types.mp4 (186.45 MB)
3 -Using Navigators.mp4 (324.73 MB)
4 -Parts Management.mp4 (407.21 MB)
5 -Layer Management.mp4 (207.07 MB)
1 -Creating plot frame.mp4 (693.98 MB)
2 -Creating cover page.mp4 (310.19 MB)
3 -Creating designation page.mp4 (362.56 MB)
4 -Creating color specification page.mp4 (267.88 MB)
5 -Creating enclosure label.mp4 (427.38 MB)
1 -Adding edz files.mp4 (167.13 MB)
2 -Creating part edz file.mp4 (356.71 MB)
3 -Selecting appropriate devices for specific applications.mp4 (270.99 MB)
4 -Cable design - part 1.mp4 (295.93 MB)
5 -Cable design - part 2.mp4 (386.49 MB)
6 -Circuit breaker selectivity (trip curves).mp4 (212.87 MB)
7 -Creating network configuration schematics.mp4 (467.39 MB)
8 -Developing ground schematics.mp4 (62.35 MB)
1 -Creating electrical schematics for the power enclosure (multi-line) - part 1.mp4 (427.62 MB)
2 -Creating electrical schematics for the power enclosure (multi-line) - part 2.mp4 (415.34 MB)
3 -Creating electrical schematics for the power enclosure (multi-line) - part 3.mp4 (197.86 MB)
4 -Creating electrical schematics for the power enclosure (multi-line) - part 4.mp4 (361.81 MB)
5 -Creating electrical schematics for the power enclosure (multi-line) - part 5.mp4 (279.06 MB)
6 -Creating electrical schematics for the power enclosure (multi-line) - part 6.mp4 (233.49 MB)
7 -Creating enclosure in 2D - part 1.mp4 (300.84 MB)
8 -Creating enclosure in 2D - part 2.mp4 (379.59 MB)
9 -Creating enclosure in 2D - part 3.mp4 (435.65 MB)
1 -Heat calculation - part 1.mp4 (309.98 MB)
2 -Heat calculation - part 2.mp4 (309.71 MB)
3 -Weight calculation.mp4 (196.41 MB)
1 -Creating enclosure door label.mp4 (151.47 MB)
2 -Generating reports (e g , table of content, part list, cable overview and etc ).mp4 (407.31 MB)
3 -Backing up project and restoring project.mp4 (184.83 MB)
4 -Exporting project to PDF.mp4 (149.2 MB)
5 -Making comments in EPLAN.mp4 (285.73 MB)
1 -New Enclosure Details for 3D.mp4 (367.89 MB)
10 -Fixing the DT's of 3D components.mp4 (182.67 MB)
11 -Adding components using snap to surface mounting.mp4 (235.38 MB)
12 -Adding components using snap to mounting grid.mp4 (143.19 MB)
13 -Adding mounting grid for door commands.mp4 (284.07 MB)
14 -Drilling pattern overview (inserting drilling patterns & locked areas).mp4 (192.33 MB)
15 -Adding 3D model views.mp4 (245.74 MB)
16 -Adding 2D drilling views.mp4 (196.4 MB)
2 -New Enclosure Walkthrough.mp4 (215.96 MB)
3 -Inserting page macros, fixing project structure & reports - part 1.mp4 (375.92 MB)
4 -Inserting page macros, fixing project structure & reports - part 2.mp4 (436.9 MB)
5 -Creating Connection between the power and control enclosures.mp4 (212.7 MB)
6 -Creating layout space and adding accessories.mp4 (170.34 MB)
7 -Adding din-rail & cable duct.mp4 (283.51 MB)
8 -Adding components on mounting plate - part 1.mp4 (328.03 MB)
9 -Adding components on mounting plate - part 2.mp4 (341.1 MB)

]
Screenshot

Spoiler

RapidGator

Bitte Anmelden oder Registrieren um Code Inhalt zu sehen!

TurboBit

Bitte Anmelden oder Registrieren um Code Inhalt zu sehen!