5.69 GB | 25min 3s | mp4 | 1280X720 | 16:9
Genre:eLearning |Language:English
Files Included :
1 -Guide on how to take the course.mp4 (44.91 MB)
2 -Recommendations.mp4 (12.87 MB)
3 -How to use Q&A and how to message me directly.mp4 (18.42 MB)
1 -Introduction.mp4 (9.82 MB)
10 -Example 7 Use sum() to sum integers and floats in a list.mp4 (4.41 MB)
11 -Example 8 Use max() to find the highest value in a list.mp4 (3.65 MB)
12 -Example 9 Use min() to find the lowest value in a list.mp4 (3.4 MB)
13 -Example 10 Retrieve second object from a list using its index.mp4 (7.56 MB)
14 -Example 11 Retrieve second to last object from a list using its index.mp4 (3.91 MB)
15 -Example 12 Check length of list before indexing.mp4 (5.66 MB)
16 -Example 13 Slice first 3 objects from list.mp4 (5.77 MB)
17 -Example 14 Slice last 3 objects from list.mp4 (1.74 MB)
18 -Example 15 Replacing original list with its sliced section.mp4 (3.24 MB)
19 -Example 16 Shortcut to replacing original list with its sliced section.mp4 (1.96 MB)
2 -Example 1 Add an object to a list.mp4 (5.46 MB)
20 -Example 17 Basic for loop.mp4 (19.56 MB)
21 -Example 17 - simplified.mp4 (6.61 MB)
22 -Illustration of for loops.mp4 (10.68 MB)
23 -Important things to remember about for loops.mp4 (42.92 MB)
24 -Example 18 Practical example of for loop.mp4 (15.38 MB)
25 -Example 19 for loop with continue statement.mp4 (12.38 MB)
26 -Example 20 for loop with break statement.mp4 (22.98 MB)
27 -Example 21 range().mp4 (4.65 MB)
28 -Example 22 Loop through indexes of multiple lists.mp4 (38.78 MB)
29 -Example 23 Nested for loop.mp4 (23.25 MB)
3 -Important notes about adding objects to lists.mp4 (8.05 MB)
30 -Important things to remember about nested for loops.mp4 (12.42 MB)
31 -Example 24 break statement in inner loop.mp4 (7.98 MB)
32 -Example 25 break statement in outer loop.mp4 (3.14 MB)
4 -Example 2 Use the in operator to check if an object is in a list.mp4 (6.79 MB)
5 -Example 3 Use not in to check if an object is not inside a list.mp4 (5.13 MB)
6 -Example 4 Remove everything from a list.mp4 (7.64 MB)
7 -Example 5 Use remove() to remove an object from a list.mp4 (5.02 MB)
8 -Important notes about the remove() method.mp4 (10.68 MB)
9 -Example 6 Use len() to count the number of objects in a list.mp4 (2.69 MB)
1 -Introduction.mp4 (10.68 MB)
10 -Example 8 Check if key in dictionary before removing keyvalue pair.mp4 (6.47 MB)
11 -Example 9 Remove a keyvalue pair that doesn't exist in a dictionary.mp4 (4 MB)
12 -Example 10 for loop through dictionary and print each key.mp4 (7.29 MB)
13 -Example 11 Retrieve value of each key during for loop of dictionary.mp4 (6.13 MB)
14 -Example 12 Removing keyvalue pairs during for loop of dictionary.mp4 (9.98 MB)
15 -Example 13 Retrieve latest price of AAPL from list inside dictionary.mp4 (14.73 MB)
16 -Example 14 Retrieve last 2 objects from list inside dictionary.mp4 (4.51 MB)
17 -Example 15 Add object to list inside dictionary.mp4 (3.76 MB)
18 -Example 16 Remove last 2 objects from list inside dictionary.mp4 (9.38 MB)
19 -Example 17 Sort dictionary in ascending order.mp4 (17.22 MB)
2 -Important things to remember about dictionaries.mp4 (15.55 MB)
20 -Example 18 Sort dictionary in descending order.mp4 (8.88 MB)
21 -Example 19 Retrieve top 2 stocks after sorting in descending order.mp4 (20.1 MB)
3 -Example 1 Retrieve a value from a dictionary.mp4 (12.93 MB)
4 -Example 2 Add a keyvalue pair to an empty dictionary.mp4 (4.32 MB)
5 -Example 3 Replace value of existing key.mp4 (7.55 MB)
6 -Example 4 If key in dictionary, print value.mp4 (6.73 MB)
7 -Example 5 If key not in dictionary, print "key not in dictionary".mp4 (4.83 MB)
8 -Example 6 Remove everything from a dictionary.mp4 (4.31 MB)
9 -Example 7 Remove keyvalue pair from dictionary.mp4 (5.35 MB)
1 -Introduction.mp4 (3.24 MB)
2 -Example 1 Function with no input parameters and returns nothing.mp4 (16.12 MB)
3 -Example 2 Function with no input parameters and returns a single object.mp4 (16.07 MB)
4 -Example 3 Function with no input parameters and returns 2 objects.mp4 (16.05 MB)
5 -Example 4 Global and local variable.mp4 (23.22 MB)
6 -Example 5 Function with 1 input parameter and returns nothing.mp4 (33.69 MB)
7 -Example 6 Function with 2 input parameters and returns nothing.mp4 (17.1 MB)
8 -Example 7 Reference parameters when inputting function inputs.mp4 (12.64 MB)
9 -Example 8 Function with 2 input parameters and returns a single object.mp4 (12.96 MB)
1 -Introduction.mp4 (17.54 MB)
10 -Example 8 Variation to example 6.mp4 (6.33 MB)
11 -Key points to remember from this chapter.mp4 (4.86 MB)
2 -Example 1 Create a car factory class.mp4 (9.39 MB)
3 -Example 2 Create an object with class from example 1.mp4 (15.89 MB)
4 -Example 3 Reference the attributes of object created in example 2.mp4 (22.49 MB)
5 -Example 4 Same as example 3 but without the self keyword behind each attribute.mp4 (10.97 MB)
6 -Example 5 Create a new method.mp4 (12.64 MB)
7 -Example 6 Run accelerate() method outside of its class.mp4 (11.14 MB)
8 -Example 7 Run accelerate() method inside of its class.mp4 (15.73 MB)
9 -Important things to take note about objects.mp4 (12.46 MB)
1 -Introduction.mp4 (1.37 MB)
2 -Example 1 Create a tuple.mp4 (1.67 MB)
3 -Example 2 Create a tuple that stores different object types.mp4 (2.28 MB)
4 -Example 3 Index first object in tuple.mp4 (2.56 MB)
5 -Example 4 Index last object in tuple.mp4 (2.57 MB)
6 -Why learn about tuples.mp4 (1.75 MB)
1 -Introduction.mp4 (8.99 MB)
2 -QuantConnect's research notebook.mp4 (19.96 MB)
3 -Important note 1 Make sure to spell library names correctly.mp4 (5.44 MB)
4 -Important note 2 Always import a library at the very top of the code.mp4 (9.18 MB)
5 -Important note 3 Coding environment and research notebook limitations.mp4 (32.39 MB)
1 -Introduction.mp4 (4.63 MB)
2 -Example 1 mean() function from the statistics library.mp4 (9.01 MB)
3 -Example 2 stdev() function from the statistics library.mp4 (5.72 MB)
1 -Introduction.mp4 (15.39 MB)
10 -Example 9 Print message if datetime 1 is more than 5 minutes from datetime 2.mp4 (10.72 MB)
2 -Example 1 Create datetime object that represents the time now.mp4 (17.05 MB)
3 -Example 2 Reference the attributes of a datetime object.mp4 (5.58 MB)
4 -Example 3 Reference the day of the week represented by a datetime object.mp4 (6.92 MB)
5 -Example 4 Create datetime object for 300 pm, 7th of December 2021.mp4 (17.47 MB)
6 -Example 5 Compare 2 datetime objects.mp4 (7.47 MB)
7 -Example 6 Add 10 hours to datetime object.mp4 (12.24 MB)
8 -Example 7 Subtract 10 weeks and 5 seconds from datetime object.mp4 (4.83 MB)
9 -Example 8 Add 5 weeks and subtract 10 hours from current time.mp4 (7.28 MB)
1 -Introduction.mp4 (9.55 MB)
10 -Example 6 Use len() to count number of values in a column before indexing.mp4 (2.47 MB)
11 -Example 7 Convert the column of a dataframe into a list.mp4 (3.62 MB)
12 -Example 8 Print index of dataframe.mp4 (5.08 MB)
13 -Example 9 Isolate time index.mp4 (9.47 MB)
14 -Example 10 Loop through dataframe and print indexes.mp4 (15.98 MB)
15 -Example 11 Loop through dataframe and print time isolated indexes.mp4 (3.54 MB)
16 -Example 12 Loop through dataframe and print rows.mp4 (5.49 MB)
17 -Example 13 Access close prices of each row during a for loop.mp4 (4.18 MB)
18 -Example 14 Create pandas dataframe.mp4 (20.59 MB)
19 -Example 15 Dataframe with single column.mp4 (2.73 MB)
2 -What is an API.mp4 (9.34 MB)
20 -Example 16 Find average of a column.mp4 (5.74 MB)
21 -Example 17 Find average of last 5 values of a column.mp4 (4.57 MB)
22 -Example 18 Find sum of a column.mp4 (2.75 MB)
23 -Example 19 Find average of row.mp4 (3.93 MB)
24 -Example 20 Column with mean of each row.mp4 (7.96 MB)
25 -Example 21 Column with mean of open, high, low and close columns.mp4 (6.01 MB)
26 -Example 22 Historical data for AAPL and TSLA.mp4 (8.28 MB)
27 -Example 23 Retrieve historical data of AAPL from combined dataframe.mp4 (6.21 MB)
28 -Example 24 30-period SMA.mp4 (23.32 MB)
29 -Example 25 Count "NaN" values.mp4 (14.17 MB)
3 -Step 1 Build a connection between research notebook and QuantConnect.mp4 (7.37 MB)
30 -Example 26 10-period EMA.mp4 (9.58 MB)
31 -Example 27 MACD with settings (12, 26, 9).mp4 (27.99 MB)
32 -Example 28 Plotting SMAs.mp4 (13.47 MB)
33 -Example 29 Fix x-axis of chart from example 28.mp4 (9.1 MB)
34 -Example 30 Print index when fast SMA crosses above slow SMA.mp4 (12.5 MB)
35 -Example 31 Request for historical data between 2 times.mp4 (25.38 MB)
36 -Example 32 Plot minute resolution SMAs with extended hours data.mp4 (3.13 MB)
37 -Example 33 Plot minute resolution SMAs without extended hours data.mp4 (10.03 MB)
38 -Example 34 Simulate historical data error.mp4 (15.51 MB)
39 -Example 35 Check if stock symbol string in dataframe index.mp4 (8.82 MB)
4 -Step 2 Request QuantConnect for access to data for a stock.mp4 (71.01 MB)
5 -Step 3 Request historical data for a stock.mp4 (49.2 MB)
6 -QuantConnect's API reference page.mp4 (14.23 MB)
7 -Example 3 Access column of dataframe using square brackets.mp4 (17.02 MB)
8 -Example 4 Index first and last value from a column.mp4 (6.41 MB)
9 -Example 5 Use len() to count number of rows in dataframe before indexing.mp4 (5 MB)
1 -Introduction.mp4 (5.86 MB)
2 -Example 1 try and except.mp4 (12 MB)
1 -Introduction to Python tutor.mp4 (5.06 MB)
2 -Example 1 How to use Python tutor for code execution visualization.mp4 (12.56 MB)
3 -Example 2 How to run code in Python tutor without code execution visualization.mp4 (3.34 MB)
1 -Introduction.mp4 (1.16 MB)
2 -Tip 1 Use finder to find spelling errors.mp4 (7.57 MB)
3 -Tip 2 Copy and paste.mp4 (3.3 MB)
1 -Introduction.mp4 (8.12 MB)
2 -File management.mp4 (10.93 MB)
1 -Introduction.mp4 (35.63 MB)
2 -Example 1 Using QuantConnect's debugger.mp4 (19.17 MB)
3 -Example 2 An error occurs while debugging.mp4 (12.27 MB)
4 -Example 3 Inspect a variable while debugging.mp4 (22.47 MB)
1 -Introduction.mp4 (5.04 MB)
2 -The plan and backtest node I recommend.mp4 (12.29 MB)
1 -Introduction.mp4 (3.75 MB)
2 -Example 1 Using self log() to print messages.mp4 (11.91 MB)
1 -Introduction.mp4 (33.94 MB)
2 -Important things to remember about the on data method.mp4 (9.78 MB)
1 -Introduction.mp4 (1.32 MB)
2 -QuantConnect's API support system.mp4 (13.19 MB)
1 -Introduction.mp4 (604.89 KB)
2 -Example 1 initialize.mp4 (45.66 MB)
1 -Introduction.mp4 (11.13 MB)
2 -Example 1 Access close price.mp4 (3.35 MB)
3 -Example 2 Print close price.mp4 (5.36 MB)
4 -Example 3 Multiple stocks.mp4 (28.64 MB)
5 -Example 4 Accessing data from "data Slice".mp4 (22.61 MB)
6 -Example 5 ETFs.mp4 (8.61 MB)
1 -Introduction.mp4 (10.59 MB)
10 -Example 8 Limit order.mp4 (28.14 MB)
11 -Example 9 Prevent repetitive limit orders for SPY.mp4 (12.74 MB)
12 -Example 10 Cancel a limit order if it's not filled after 5 minutes.mp4 (24.49 MB)
13 -Example 11 Update limit price and quantity if limit order not filled after 5min.mp4 (10.3 MB)
14 -Example 12 Change limit order to market order if it's not filled after 5min.mp4 (8.69 MB)
15 -Example 13 Enter a long position if MACD is greater than MACD signal.mp4 (20.43 MB)
16 -Example 14 Invest equally in each asset.mp4 (16.29 MB)
17 -Example 15 Prevent repetitive limit orders.mp4 (8.91 MB)
18 -Example 16 Cancel limit orders if they don't fill after 5 minutes.mp4 (4.23 MB)
19 -Example 17 Update limit price of limit orders if they don't fill after 5min.mp4 (6.75 MB)
2 -Important notes about orders.mp4 (7.95 MB)
20 -Example 18 Change limit orders to market orders if they don't fill after 5min.mp4 (4.46 MB)
21 -Example 19 Limit order management with long and short orders.mp4 (29.85 MB)
22 -Conclusion.mp4 (5.84 MB)
3 -Example 1 Submit market order for SPY.mp4 (17.4 MB)
4 -Example 2 Only buy SPY if not already invested.mp4 (4.88 MB)
5 -Example 3 Short SPY.mp4 (4.68 MB)
6 -Example 4 Buy SPY using 50% of portfolio cash.mp4 (10.97 MB)
7 -Example 5 Buy SPY with margin.mp4 (11.49 MB)
8 -Example 6 Closing a long position.mp4 (5.06 MB)
9 -Example 7 Closing a short position.mp4 (9.91 MB)
1 -Introduction.mp4 (1.88 MB)
2 -The 4 basic object types.mp4 (18.15 MB)
3 -Important things to remember about basic object types.mp4 (8.7 MB)
1 -Introduction.mp4 (10.43 MB)
10 -Example 9 Take profit and trailing stop loss.mp4 (13.99 MB)
2 -Example 1 Prevent buying and selling (selling and buying) on the same day.mp4 (16.59 MB)
3 -Example 2 Stop loss on long positions.mp4 (10.37 MB)
4 -Example 3 Stop loss on short positions.mp4 (4 MB)
5 -Example 4 Stop loss in a trading bot with both long and short positions.mp4 (7.62 MB)
6 -Example 5 Take profit and stop loss.mp4 (12.83 MB)
7 -Example 6 Trailing stop loss on long positions.mp4 (15.81 MB)
8 -Example 7 Trailing stop loss on short positions.mp4 (6.78 MB)
9 -Example 8 Trailing stop loss in a trading bot with long and short positions.mp4 (6.52 MB)
1 -Introduction.mp4 (12.61 MB)
2 -Example 1 Log SPY's price at 931 am.mp4 (21.43 MB)
3 -Example 2 Log SPY's price at 915 am (pre-market hours).mp4 (4.26 MB)
4 -Example 3 Log SPY's price at market close.mp4 (3.57 MB)
5 -Example 4 Log SPY's price during half-day trading days.mp4 (7.75 MB)
6 -Example 5 Schedule trading logic to run only after 10 am.mp4 (13.97 MB)
7 -Example 6 Only trade between 10 am and 11 am.mp4 (6.86 MB)
8 -Example 7 Collect data during regular hours, trade during after hours.mp4 (29.6 MB)
9 -Example 8 Only trade on Tuesdays and Thursdays.mp4 (9.97 MB)
1 -Introduction.mp4 (2.92 MB)
2 -Example 1 Request historical data for AAPL.mp4 (2.4 MB)
3 -Example 2 Request historical data for multiple assets.mp4 (4 MB)
4 -Example 3 Buy if current price greater than price before start of backtest.mp4 (12.43 MB)
5 -Example 4 Same as example 3 but with daily close prices updated.mp4 (7.04 MB)
6 -Example 5 Same as example 4 but with historical data requests in on data.mp4 (14.84 MB)
7 -Example 6 Buy if current price greater than average of past 10 daily close.mp4 (12.83 MB)
1 -Introduction.mp4 (8.11 MB)
10 -Example 9 Create consolidators for multiple assets.mp4 (10.24 MB)
11 -Example 10 Buy 1 share in consolidated candlestick receiver method.mp4 (13.27 MB)
12 -Example 11 Submit order for symbol of bar received in consolidated receiver.mp4 (5.39 MB)
13 -Example 12 Buy if current price is greater than average of past 10 cons close.mp4 (9.94 MB)
14 -Example 13 Warm up consolidators of multiple assets.mp4 (18.23 MB)
15 -Example 14 Multiple assets with multiple consolidated periods.mp4 (18.79 MB)
16 -Example 15 Prevent orders from being submitted in initialize (during warm up).mp4 (7.47 MB)
2 -Example 1 Create 5-minute candlesticks for AAPL.mp4 (23.73 MB)
3 -Example 2 Entry orders in consolidated candlestick receiver and on data.mp4 (10.55 MB)
4 -Example 3 Buy if current price is greater than average of past 10 5-min close.mp4 (18.61 MB)
5 -Example 4 Create consolidated candlesticks with historical data.mp4 (37.1 MB)
6 -Example 5 3 consolidated periods.mp4 (6.93 MB)
7 -Example 6 Example 5 with trading logic.mp4 (18.86 MB)
8 -Example 7 Warm up consolidators from example 6.mp4 (12.59 MB)
9 -Example 8 Same as example 7 but with different warm up resolutions.mp4 (23.6 MB)
1 -Introduction.mp4 (38.3 MB)
10 -Example 9 Warm up MACD.mp4 (11.81 MB)
11 -Example 10 Warm up MACD that's calculated with high prices.mp4 (4.24 MB)
12 -Example 11 Warm up ATR.mp4 (6.62 MB)
13 -Example 12 Warm up OBV.mp4 (5.85 MB)
14 -Example 13 Warm up MACD and RSI.mp4 (6.61 MB)
15 -Example 14 Warm up MACD, RSI and ATR.mp4 (5.24 MB)
16 -Example 15 Warm up MACD, RSI, ATR and OBV.mp4 (6.68 MB)
17 -Example 16 Initialize and warm up MACD for multiple assets.mp4 (10.51 MB)
18 -Example 17 Initialize and warm up MACD and ATR for multiple assets.mp4 (8.77 MB)
19 -Example 18 Initialize and warm up MACD, ATR and OBV for multiple assets.mp4 (16 MB)
2 -Example 1 Initialize MACD indicator.mp4 (29.21 MB)
20 -Example 19 MACD trading strategy.mp4 (40.76 MB)
21 -Example 20 MACD and RSI trading strategy.mp4 (10.55 MB)
22 -Example 21 MACD and RSI trading strategy for multiple assets.mp4 (13.59 MB)
23 -Example 22 Update MACD with 5-minute candlesticks.mp4 (24.02 MB)
24 -Example 23 Update MACD and RSI with 5-minute candlesticks.mp4 (7.05 MB)
25 -Example 24 Update MACD with 5min bars and ATR with 4hour bars.mp4 (8.89 MB)
26 -Example 25 Same as example 24 but with multiple assets.mp4 (24.18 MB)
27 -Example 26 MACD updated with property prices.mp4 (60.35 MB)
3 -Example 2 Initialize RSI indicator.mp4 (8.05 MB)
4 -Example 3 Initialize ATR indicator.mp4 (5.95 MB)
5 -Example 4 Initialize OBV indicator.mp4 (6.76 MB)
6 -Example 5 Input moving average type setting for MACD.mp4 (13.94 MB)
7 -Example 6 Input moving average type setting for RSI.mp4 (10.59 MB)
8 -Example 7 Update MACD with high prices instead of close prices.mp4 (22.94 MB)
9 -Example 8 Update BB (Bollinger Bands) with median instead of close prices.mp4 (15.68 MB)
1 -Introduction.mp4 (69.24 MB)
10 -Example 9 Ensure that AAPL, TSLA and SPY get filtered down.mp4 (15.55 MB)
11 -Example 10 Adjust universe settings.mp4 (12.92 MB)
12 -Example 11 Schedule universe selection to happen only on Sunday.mp4 (25.61 MB)
13 -Example 12 Universe selection with trading logic.mp4 (37.55 MB)
14 -Important things to remember about universe selection.mp4 (12.16 MB)
2 -Example 1 Filter down penny stocks.mp4 (81.01 MB)
3 -Example 2 Filter stocks of companies that operate in the semiconductor industry.mp4 (48.08 MB)
4 -Example 3 Filter based on revenue growth.mp4 (18.63 MB)
5 -Example 4 Filter top 5 companies in terms of revenue growth.mp4 (39.07 MB)
6 -Example 5 Filter stocks (current daily closing $ daily closing $ 15 days ago).mp4 (29.99 MB)
7 -Example 6 Using 200-EMA to filter stocks.mp4 (14.63 MB)
8 -Example 7 Create SMA indicators for stocks entering the trading bot.mp4 (31.77 MB)
9 -Example 8 Updating indicators with consolidated data.mp4 (32 MB)
1 -Introduction.mp4 (24.86 MB)
2 -Example 1 Tiingo news with 1 stock.mp4 (105.42 MB)
3 -Example 2 Tiingo news with universe selection.mp4 (67.59 MB)
1 -Introduction.mp4 (15.57 MB)
2 -Example 1 Momentum trading strategy.mp4 (130.01 MB)
1 -Introduction.mp4 (28.19 MB)
2 -My recommendation.mp4 (2.28 MB)
1 -Introduction.mp4 (740.36 KB)
2 -Tips.mp4 (5.37 MB)
3 -Common mistakes.mp4 (12.87 MB)
1 -Introduction.mp4 (4.79 MB)
2 -Quick example of how to use variables to perform mathematical operations.mp4 (4.52 MB)
3 -Important notes about variables and how to use them.mp4 (30.04 MB)
1 -Introduction.mp4 (21.24 MB)
2 -Launch a trading bot for live trading.mp4 (54.81 MB)
1 -Introduction.mp4 (4.67 MB)
2 -Example 1 Send email and sms notifications when order submitted.mp4 (11.02 MB)
1 -Introduction.mp4 (1.83 MB)
2 -Important points about Interactive Brokers.mp4 (36.88 MB)
3 -Conclusion.mp4 (1.7 MB)
1 -Introduction.mp4 (59.29 MB)
10 -Example 9 Trading longer expiry options.mp4 (59.04 MB)
11 -Example 10 Selling option contracts.mp4 (96.59 MB)
12 -Example 11 Launching an options trading bot with IBKR.mp4 (89.36 MB)
13 -Example 12 Filter only call options.mp4 (13.85 MB)
2 -Example 1 Request for options.mp4 (56.06 MB)
3 -Example 2 Filter option contracts.mp4 (87.71 MB)
4 -Example 3 Access attributes of individual option contracts.mp4 (92.22 MB)
5 -Example 4 Working with options of multiple stocksETFs.mp4 (39.35 MB)
6 -Example 5 Trading options based on MACD crossover of underlying.mp4 (81.93 MB)
7 -Example 6 Stop trading and liquidate all positions at 355 PM.mp4 (37.69 MB)
8 -Example 7 Position sizing for options.mp4 (14.52 MB)
9 -Example 8 Take profit and stop loss.mp4 (14.63 MB)
1 -Introduction.mp4 (292.39 MB)
1 -Introduction.mp4 (7.68 MB)
2 -Example 1 Print "Hello world!" from a variable.mp4 (6.65 MB)
3 -Example 2 Print "Hello world!" directly.mp4 (5.84 MB)
4 -Upsides and downsides of print function.mp4 (17.97 MB)
5 -Important note about spaces.mp4 (9.34 MB)
1 -Introduction.mp4 (822.11 KB)
10 -Example 8 Converting float string to float.mp4 (6.58 MB)
11 -Example 9 len() function.mp4 (23.91 MB)
12 -Example 10 Index first character from string.mp4 (17.27 MB)
13 -Example 11 Index last character from string.mp4 (7.93 MB)
14 -Example 12 Index fourth character from string.mp4 (3 MB)
15 -Example 13 Index fourth to last character from string.mp4 (5.91 MB)
16 -Example 14 Index a character that does not exist.mp4 (6.29 MB)
17 -Example 15 Slice a string without its first character.mp4 (19.93 MB)
18 -Example 16 Slice a string without its last character.mp4 (6.48 MB)
19 -Example 17 Slice a string without its first and last character.mp4 (3.18 MB)
2 -What are methods in relation to functions.mp4 (14.18 MB)
20 -Example 18 Same as example 17 but with steps of 2.mp4 (5.45 MB)
21 -Example 19 Slicing the first 4 characters of a string.mp4 (4.52 MB)
22 -Example 20 Slice a string from the 4th to last index onward.mp4 (2.4 MB)
23 -Example 21 Slicing indexes that are not in the string.mp4 (6.59 MB)
3 -Example 1 lower() method.mp4 (4.86 MB)
4 -Example 2 upper() method.mp4 (2.92 MB)
5 -Example 3 Adding strings.mp4 (8.23 MB)
6 -Example 4 Multiplying strings.mp4 (6.91 MB)
7 -Example 5 Replacing strings after mathematical operation.mp4 (14.31 MB)
8 -Example 6 Compounding strings.mp4 (19.97 MB)
9 -Example 7 Converting integer string to integer.mp4 (8.32 MB)
1 -Introduction.mp4 (4.24 MB)
10 -Example 9 Compound with divisions.mp4 (2.32 MB)
11 -Example 10 Compound with exponent.mp4 (5.23 MB)
12 -Example 11 Compound with modulo.mp4 (2.25 MB)
13 -Example 12 Compound with floor division.mp4 (1.93 MB)
14 -Example 13 Shortcut to compounding.mp4 (4.24 MB)
15 -Example 14 Convert integer or float into a string.mp4 (7.74 MB)
16 -Example 15 Convert integerfloat into a string and add it to another string.mp4 (8.31 MB)
17 -Example 16 Convert float to integer.mp4 (2.93 MB)
18 -Example 17 Convert integer to float.mp4 (4.37 MB)
19 -Example 18 Getting the absolute value of an integer or float.mp4 (4.77 MB)
2 -Example 1 10 % 3.mp4 (11.59 MB)
20 -Example 19 Multiplying an integer with a float.mp4 (1.56 MB)
21 -Example 20 Multiplying an integer with an integer.mp4 (793.7 KB)
22 -Example 21 Multiplying a float with a float.mp4 (3.58 MB)
23 -Operator precedence.mp4 (14.48 MB)
3 -Example 2 17 % 7.mp4 (5.19 MB)
4 -Example 3 21 % 8.mp4 (3.03 MB)
5 -Example 4 10 3.mp4 (3.89 MB)
6 -Example 5 18 5.mp4 (1.75 MB)
7 -Example 6 Compound with addition.mp4 (4.53 MB)
8 -Example 7 Compound with subtractions.mp4 (2.77 MB)
9 -Example 8 Compound with multiplications.mp4 (1.34 MB)
1 -Introduction.mp4 (8.45 MB)
10 -Example 7 if elif.mp4 (7.44 MB)
11 -Example 8 if elif statements but both return False.mp4 (4.1 MB)
12 -Example 9 Multiple elif statements following an if statement.mp4 (3.63 MB)
13 -Example 10 Multiple elif statements following an if statement but.mp4 (4.64 MB)
14 -Example 11 if.elif.else.mp4 (4.65 MB)
15 -Example 12 Adding an and operator to an if statement.mp4 (14.26 MB)
16 -Example 13 Adding an or operator to an if statement.mp4 (6.81 MB)
17 -Example 14 and and or operators within 1 if statement.mp4 (14.82 MB)
18 -Example 15 pass statement after if statement.mp4 (11.01 MB)
2 -Example 1 Check if integer 10 is greater than integer 5.mp4 (7.55 MB)
3 -Important information about indentations.mp4 (15.29 MB)
4 -Important information about conditional statements.mp4 (11.37 MB)
5 -Example 2 Single nested if statement.mp4 (8.5 MB)
6 -Example 3 Multiple nested if statements.mp4 (3.98 MB)
7 -Example 4 Line after multiple nested if statements.mp4 (3.65 MB)
8 -Example 5 if else.mp4 (6.22 MB)
9 -Example 6 if.else statements nested within another.mp4 (2.61 MB)
1 -Introduction.mp4 (2.41 MB)
2 -Example 1 if.elif.else statements with comments.mp4 (7.16 MB)
3 -Example 2 Using the # symbol to comment out code for debugging.mp4 (24.54 MB)
2 -Recommendations.mp4 (12.87 MB)
3 -How to use Q&A and how to message me directly.mp4 (18.42 MB)
1 -Introduction.mp4 (9.82 MB)
10 -Example 7 Use sum() to sum integers and floats in a list.mp4 (4.41 MB)
11 -Example 8 Use max() to find the highest value in a list.mp4 (3.65 MB)
12 -Example 9 Use min() to find the lowest value in a list.mp4 (3.4 MB)
13 -Example 10 Retrieve second object from a list using its index.mp4 (7.56 MB)
14 -Example 11 Retrieve second to last object from a list using its index.mp4 (3.91 MB)
15 -Example 12 Check length of list before indexing.mp4 (5.66 MB)
16 -Example 13 Slice first 3 objects from list.mp4 (5.77 MB)
17 -Example 14 Slice last 3 objects from list.mp4 (1.74 MB)
18 -Example 15 Replacing original list with its sliced section.mp4 (3.24 MB)
19 -Example 16 Shortcut to replacing original list with its sliced section.mp4 (1.96 MB)
2 -Example 1 Add an object to a list.mp4 (5.46 MB)
20 -Example 17 Basic for loop.mp4 (19.56 MB)
21 -Example 17 - simplified.mp4 (6.61 MB)
22 -Illustration of for loops.mp4 (10.68 MB)
23 -Important things to remember about for loops.mp4 (42.92 MB)
24 -Example 18 Practical example of for loop.mp4 (15.38 MB)
25 -Example 19 for loop with continue statement.mp4 (12.38 MB)
26 -Example 20 for loop with break statement.mp4 (22.98 MB)
27 -Example 21 range().mp4 (4.65 MB)
28 -Example 22 Loop through indexes of multiple lists.mp4 (38.78 MB)
29 -Example 23 Nested for loop.mp4 (23.25 MB)
3 -Important notes about adding objects to lists.mp4 (8.05 MB)
30 -Important things to remember about nested for loops.mp4 (12.42 MB)
31 -Example 24 break statement in inner loop.mp4 (7.98 MB)
32 -Example 25 break statement in outer loop.mp4 (3.14 MB)
4 -Example 2 Use the in operator to check if an object is in a list.mp4 (6.79 MB)
5 -Example 3 Use not in to check if an object is not inside a list.mp4 (5.13 MB)
6 -Example 4 Remove everything from a list.mp4 (7.64 MB)
7 -Example 5 Use remove() to remove an object from a list.mp4 (5.02 MB)
8 -Important notes about the remove() method.mp4 (10.68 MB)
9 -Example 6 Use len() to count the number of objects in a list.mp4 (2.69 MB)
1 -Introduction.mp4 (10.68 MB)
10 -Example 8 Check if key in dictionary before removing keyvalue pair.mp4 (6.47 MB)
11 -Example 9 Remove a keyvalue pair that doesn't exist in a dictionary.mp4 (4 MB)
12 -Example 10 for loop through dictionary and print each key.mp4 (7.29 MB)
13 -Example 11 Retrieve value of each key during for loop of dictionary.mp4 (6.13 MB)
14 -Example 12 Removing keyvalue pairs during for loop of dictionary.mp4 (9.98 MB)
15 -Example 13 Retrieve latest price of AAPL from list inside dictionary.mp4 (14.73 MB)
16 -Example 14 Retrieve last 2 objects from list inside dictionary.mp4 (4.51 MB)
17 -Example 15 Add object to list inside dictionary.mp4 (3.76 MB)
18 -Example 16 Remove last 2 objects from list inside dictionary.mp4 (9.38 MB)
19 -Example 17 Sort dictionary in ascending order.mp4 (17.22 MB)
2 -Important things to remember about dictionaries.mp4 (15.55 MB)
20 -Example 18 Sort dictionary in descending order.mp4 (8.88 MB)
21 -Example 19 Retrieve top 2 stocks after sorting in descending order.mp4 (20.1 MB)
3 -Example 1 Retrieve a value from a dictionary.mp4 (12.93 MB)
4 -Example 2 Add a keyvalue pair to an empty dictionary.mp4 (4.32 MB)
5 -Example 3 Replace value of existing key.mp4 (7.55 MB)
6 -Example 4 If key in dictionary, print value.mp4 (6.73 MB)
7 -Example 5 If key not in dictionary, print "key not in dictionary".mp4 (4.83 MB)
8 -Example 6 Remove everything from a dictionary.mp4 (4.31 MB)
9 -Example 7 Remove keyvalue pair from dictionary.mp4 (5.35 MB)
1 -Introduction.mp4 (3.24 MB)
2 -Example 1 Function with no input parameters and returns nothing.mp4 (16.12 MB)
3 -Example 2 Function with no input parameters and returns a single object.mp4 (16.07 MB)
4 -Example 3 Function with no input parameters and returns 2 objects.mp4 (16.05 MB)
5 -Example 4 Global and local variable.mp4 (23.22 MB)
6 -Example 5 Function with 1 input parameter and returns nothing.mp4 (33.69 MB)
7 -Example 6 Function with 2 input parameters and returns nothing.mp4 (17.1 MB)
8 -Example 7 Reference parameters when inputting function inputs.mp4 (12.64 MB)
9 -Example 8 Function with 2 input parameters and returns a single object.mp4 (12.96 MB)
1 -Introduction.mp4 (17.54 MB)
10 -Example 8 Variation to example 6.mp4 (6.33 MB)
11 -Key points to remember from this chapter.mp4 (4.86 MB)
2 -Example 1 Create a car factory class.mp4 (9.39 MB)
3 -Example 2 Create an object with class from example 1.mp4 (15.89 MB)
4 -Example 3 Reference the attributes of object created in example 2.mp4 (22.49 MB)
5 -Example 4 Same as example 3 but without the self keyword behind each attribute.mp4 (10.97 MB)
6 -Example 5 Create a new method.mp4 (12.64 MB)
7 -Example 6 Run accelerate() method outside of its class.mp4 (11.14 MB)
8 -Example 7 Run accelerate() method inside of its class.mp4 (15.73 MB)
9 -Important things to take note about objects.mp4 (12.46 MB)
1 -Introduction.mp4 (1.37 MB)
2 -Example 1 Create a tuple.mp4 (1.67 MB)
3 -Example 2 Create a tuple that stores different object types.mp4 (2.28 MB)
4 -Example 3 Index first object in tuple.mp4 (2.56 MB)
5 -Example 4 Index last object in tuple.mp4 (2.57 MB)
6 -Why learn about tuples.mp4 (1.75 MB)
1 -Introduction.mp4 (8.99 MB)
2 -QuantConnect's research notebook.mp4 (19.96 MB)
3 -Important note 1 Make sure to spell library names correctly.mp4 (5.44 MB)
4 -Important note 2 Always import a library at the very top of the code.mp4 (9.18 MB)
5 -Important note 3 Coding environment and research notebook limitations.mp4 (32.39 MB)
1 -Introduction.mp4 (4.63 MB)
2 -Example 1 mean() function from the statistics library.mp4 (9.01 MB)
3 -Example 2 stdev() function from the statistics library.mp4 (5.72 MB)
1 -Introduction.mp4 (15.39 MB)
10 -Example 9 Print message if datetime 1 is more than 5 minutes from datetime 2.mp4 (10.72 MB)
2 -Example 1 Create datetime object that represents the time now.mp4 (17.05 MB)
3 -Example 2 Reference the attributes of a datetime object.mp4 (5.58 MB)
4 -Example 3 Reference the day of the week represented by a datetime object.mp4 (6.92 MB)
5 -Example 4 Create datetime object for 300 pm, 7th of December 2021.mp4 (17.47 MB)
6 -Example 5 Compare 2 datetime objects.mp4 (7.47 MB)
7 -Example 6 Add 10 hours to datetime object.mp4 (12.24 MB)
8 -Example 7 Subtract 10 weeks and 5 seconds from datetime object.mp4 (4.83 MB)
9 -Example 8 Add 5 weeks and subtract 10 hours from current time.mp4 (7.28 MB)
1 -Introduction.mp4 (9.55 MB)
10 -Example 6 Use len() to count number of values in a column before indexing.mp4 (2.47 MB)
11 -Example 7 Convert the column of a dataframe into a list.mp4 (3.62 MB)
12 -Example 8 Print index of dataframe.mp4 (5.08 MB)
13 -Example 9 Isolate time index.mp4 (9.47 MB)
14 -Example 10 Loop through dataframe and print indexes.mp4 (15.98 MB)
15 -Example 11 Loop through dataframe and print time isolated indexes.mp4 (3.54 MB)
16 -Example 12 Loop through dataframe and print rows.mp4 (5.49 MB)
17 -Example 13 Access close prices of each row during a for loop.mp4 (4.18 MB)
18 -Example 14 Create pandas dataframe.mp4 (20.59 MB)
19 -Example 15 Dataframe with single column.mp4 (2.73 MB)
2 -What is an API.mp4 (9.34 MB)
20 -Example 16 Find average of a column.mp4 (5.74 MB)
21 -Example 17 Find average of last 5 values of a column.mp4 (4.57 MB)
22 -Example 18 Find sum of a column.mp4 (2.75 MB)
23 -Example 19 Find average of row.mp4 (3.93 MB)
24 -Example 20 Column with mean of each row.mp4 (7.96 MB)
25 -Example 21 Column with mean of open, high, low and close columns.mp4 (6.01 MB)
26 -Example 22 Historical data for AAPL and TSLA.mp4 (8.28 MB)
27 -Example 23 Retrieve historical data of AAPL from combined dataframe.mp4 (6.21 MB)
28 -Example 24 30-period SMA.mp4 (23.32 MB)
29 -Example 25 Count "NaN" values.mp4 (14.17 MB)
3 -Step 1 Build a connection between research notebook and QuantConnect.mp4 (7.37 MB)
30 -Example 26 10-period EMA.mp4 (9.58 MB)
31 -Example 27 MACD with settings (12, 26, 9).mp4 (27.99 MB)
32 -Example 28 Plotting SMAs.mp4 (13.47 MB)
33 -Example 29 Fix x-axis of chart from example 28.mp4 (9.1 MB)
34 -Example 30 Print index when fast SMA crosses above slow SMA.mp4 (12.5 MB)
35 -Example 31 Request for historical data between 2 times.mp4 (25.38 MB)
36 -Example 32 Plot minute resolution SMAs with extended hours data.mp4 (3.13 MB)
37 -Example 33 Plot minute resolution SMAs without extended hours data.mp4 (10.03 MB)
38 -Example 34 Simulate historical data error.mp4 (15.51 MB)
39 -Example 35 Check if stock symbol string in dataframe index.mp4 (8.82 MB)
4 -Step 2 Request QuantConnect for access to data for a stock.mp4 (71.01 MB)
5 -Step 3 Request historical data for a stock.mp4 (49.2 MB)
6 -QuantConnect's API reference page.mp4 (14.23 MB)
7 -Example 3 Access column of dataframe using square brackets.mp4 (17.02 MB)
8 -Example 4 Index first and last value from a column.mp4 (6.41 MB)
9 -Example 5 Use len() to count number of rows in dataframe before indexing.mp4 (5 MB)
1 -Introduction.mp4 (5.86 MB)
2 -Example 1 try and except.mp4 (12 MB)
1 -Introduction to Python tutor.mp4 (5.06 MB)
2 -Example 1 How to use Python tutor for code execution visualization.mp4 (12.56 MB)
3 -Example 2 How to run code in Python tutor without code execution visualization.mp4 (3.34 MB)
1 -Introduction.mp4 (1.16 MB)
2 -Tip 1 Use finder to find spelling errors.mp4 (7.57 MB)
3 -Tip 2 Copy and paste.mp4 (3.3 MB)
1 -Introduction.mp4 (8.12 MB)
2 -File management.mp4 (10.93 MB)
1 -Introduction.mp4 (35.63 MB)
2 -Example 1 Using QuantConnect's debugger.mp4 (19.17 MB)
3 -Example 2 An error occurs while debugging.mp4 (12.27 MB)
4 -Example 3 Inspect a variable while debugging.mp4 (22.47 MB)
1 -Introduction.mp4 (5.04 MB)
2 -The plan and backtest node I recommend.mp4 (12.29 MB)
1 -Introduction.mp4 (3.75 MB)
2 -Example 1 Using self log() to print messages.mp4 (11.91 MB)
1 -Introduction.mp4 (33.94 MB)
2 -Important things to remember about the on data method.mp4 (9.78 MB)
1 -Introduction.mp4 (1.32 MB)
2 -QuantConnect's API support system.mp4 (13.19 MB)
1 -Introduction.mp4 (604.89 KB)
2 -Example 1 initialize.mp4 (45.66 MB)
1 -Introduction.mp4 (11.13 MB)
2 -Example 1 Access close price.mp4 (3.35 MB)
3 -Example 2 Print close price.mp4 (5.36 MB)
4 -Example 3 Multiple stocks.mp4 (28.64 MB)
5 -Example 4 Accessing data from "data Slice".mp4 (22.61 MB)
6 -Example 5 ETFs.mp4 (8.61 MB)
1 -Introduction.mp4 (10.59 MB)
10 -Example 8 Limit order.mp4 (28.14 MB)
11 -Example 9 Prevent repetitive limit orders for SPY.mp4 (12.74 MB)
12 -Example 10 Cancel a limit order if it's not filled after 5 minutes.mp4 (24.49 MB)
13 -Example 11 Update limit price and quantity if limit order not filled after 5min.mp4 (10.3 MB)
14 -Example 12 Change limit order to market order if it's not filled after 5min.mp4 (8.69 MB)
15 -Example 13 Enter a long position if MACD is greater than MACD signal.mp4 (20.43 MB)
16 -Example 14 Invest equally in each asset.mp4 (16.29 MB)
17 -Example 15 Prevent repetitive limit orders.mp4 (8.91 MB)
18 -Example 16 Cancel limit orders if they don't fill after 5 minutes.mp4 (4.23 MB)
19 -Example 17 Update limit price of limit orders if they don't fill after 5min.mp4 (6.75 MB)
2 -Important notes about orders.mp4 (7.95 MB)
20 -Example 18 Change limit orders to market orders if they don't fill after 5min.mp4 (4.46 MB)
21 -Example 19 Limit order management with long and short orders.mp4 (29.85 MB)
22 -Conclusion.mp4 (5.84 MB)
3 -Example 1 Submit market order for SPY.mp4 (17.4 MB)
4 -Example 2 Only buy SPY if not already invested.mp4 (4.88 MB)
5 -Example 3 Short SPY.mp4 (4.68 MB)
6 -Example 4 Buy SPY using 50% of portfolio cash.mp4 (10.97 MB)
7 -Example 5 Buy SPY with margin.mp4 (11.49 MB)
8 -Example 6 Closing a long position.mp4 (5.06 MB)
9 -Example 7 Closing a short position.mp4 (9.91 MB)
1 -Introduction.mp4 (1.88 MB)
2 -The 4 basic object types.mp4 (18.15 MB)
3 -Important things to remember about basic object types.mp4 (8.7 MB)
1 -Introduction.mp4 (10.43 MB)
10 -Example 9 Take profit and trailing stop loss.mp4 (13.99 MB)
2 -Example 1 Prevent buying and selling (selling and buying) on the same day.mp4 (16.59 MB)
3 -Example 2 Stop loss on long positions.mp4 (10.37 MB)
4 -Example 3 Stop loss on short positions.mp4 (4 MB)
5 -Example 4 Stop loss in a trading bot with both long and short positions.mp4 (7.62 MB)
6 -Example 5 Take profit and stop loss.mp4 (12.83 MB)
7 -Example 6 Trailing stop loss on long positions.mp4 (15.81 MB)
8 -Example 7 Trailing stop loss on short positions.mp4 (6.78 MB)
9 -Example 8 Trailing stop loss in a trading bot with long and short positions.mp4 (6.52 MB)
1 -Introduction.mp4 (12.61 MB)
2 -Example 1 Log SPY's price at 931 am.mp4 (21.43 MB)
3 -Example 2 Log SPY's price at 915 am (pre-market hours).mp4 (4.26 MB)
4 -Example 3 Log SPY's price at market close.mp4 (3.57 MB)
5 -Example 4 Log SPY's price during half-day trading days.mp4 (7.75 MB)
6 -Example 5 Schedule trading logic to run only after 10 am.mp4 (13.97 MB)
7 -Example 6 Only trade between 10 am and 11 am.mp4 (6.86 MB)
8 -Example 7 Collect data during regular hours, trade during after hours.mp4 (29.6 MB)
9 -Example 8 Only trade on Tuesdays and Thursdays.mp4 (9.97 MB)
1 -Introduction.mp4 (2.92 MB)
2 -Example 1 Request historical data for AAPL.mp4 (2.4 MB)
3 -Example 2 Request historical data for multiple assets.mp4 (4 MB)
4 -Example 3 Buy if current price greater than price before start of backtest.mp4 (12.43 MB)
5 -Example 4 Same as example 3 but with daily close prices updated.mp4 (7.04 MB)
6 -Example 5 Same as example 4 but with historical data requests in on data.mp4 (14.84 MB)
7 -Example 6 Buy if current price greater than average of past 10 daily close.mp4 (12.83 MB)
1 -Introduction.mp4 (8.11 MB)
10 -Example 9 Create consolidators for multiple assets.mp4 (10.24 MB)
11 -Example 10 Buy 1 share in consolidated candlestick receiver method.mp4 (13.27 MB)
12 -Example 11 Submit order for symbol of bar received in consolidated receiver.mp4 (5.39 MB)
13 -Example 12 Buy if current price is greater than average of past 10 cons close.mp4 (9.94 MB)
14 -Example 13 Warm up consolidators of multiple assets.mp4 (18.23 MB)
15 -Example 14 Multiple assets with multiple consolidated periods.mp4 (18.79 MB)
16 -Example 15 Prevent orders from being submitted in initialize (during warm up).mp4 (7.47 MB)
2 -Example 1 Create 5-minute candlesticks for AAPL.mp4 (23.73 MB)
3 -Example 2 Entry orders in consolidated candlestick receiver and on data.mp4 (10.55 MB)
4 -Example 3 Buy if current price is greater than average of past 10 5-min close.mp4 (18.61 MB)
5 -Example 4 Create consolidated candlesticks with historical data.mp4 (37.1 MB)
6 -Example 5 3 consolidated periods.mp4 (6.93 MB)
7 -Example 6 Example 5 with trading logic.mp4 (18.86 MB)
8 -Example 7 Warm up consolidators from example 6.mp4 (12.59 MB)
9 -Example 8 Same as example 7 but with different warm up resolutions.mp4 (23.6 MB)
1 -Introduction.mp4 (38.3 MB)
10 -Example 9 Warm up MACD.mp4 (11.81 MB)
11 -Example 10 Warm up MACD that's calculated with high prices.mp4 (4.24 MB)
12 -Example 11 Warm up ATR.mp4 (6.62 MB)
13 -Example 12 Warm up OBV.mp4 (5.85 MB)
14 -Example 13 Warm up MACD and RSI.mp4 (6.61 MB)
15 -Example 14 Warm up MACD, RSI and ATR.mp4 (5.24 MB)
16 -Example 15 Warm up MACD, RSI, ATR and OBV.mp4 (6.68 MB)
17 -Example 16 Initialize and warm up MACD for multiple assets.mp4 (10.51 MB)
18 -Example 17 Initialize and warm up MACD and ATR for multiple assets.mp4 (8.77 MB)
19 -Example 18 Initialize and warm up MACD, ATR and OBV for multiple assets.mp4 (16 MB)
2 -Example 1 Initialize MACD indicator.mp4 (29.21 MB)
20 -Example 19 MACD trading strategy.mp4 (40.76 MB)
21 -Example 20 MACD and RSI trading strategy.mp4 (10.55 MB)
22 -Example 21 MACD and RSI trading strategy for multiple assets.mp4 (13.59 MB)
23 -Example 22 Update MACD with 5-minute candlesticks.mp4 (24.02 MB)
24 -Example 23 Update MACD and RSI with 5-minute candlesticks.mp4 (7.05 MB)
25 -Example 24 Update MACD with 5min bars and ATR with 4hour bars.mp4 (8.89 MB)
26 -Example 25 Same as example 24 but with multiple assets.mp4 (24.18 MB)
27 -Example 26 MACD updated with property prices.mp4 (60.35 MB)
3 -Example 2 Initialize RSI indicator.mp4 (8.05 MB)
4 -Example 3 Initialize ATR indicator.mp4 (5.95 MB)
5 -Example 4 Initialize OBV indicator.mp4 (6.76 MB)
6 -Example 5 Input moving average type setting for MACD.mp4 (13.94 MB)
7 -Example 6 Input moving average type setting for RSI.mp4 (10.59 MB)
8 -Example 7 Update MACD with high prices instead of close prices.mp4 (22.94 MB)
9 -Example 8 Update BB (Bollinger Bands) with median instead of close prices.mp4 (15.68 MB)
1 -Introduction.mp4 (69.24 MB)
10 -Example 9 Ensure that AAPL, TSLA and SPY get filtered down.mp4 (15.55 MB)
11 -Example 10 Adjust universe settings.mp4 (12.92 MB)
12 -Example 11 Schedule universe selection to happen only on Sunday.mp4 (25.61 MB)
13 -Example 12 Universe selection with trading logic.mp4 (37.55 MB)
14 -Important things to remember about universe selection.mp4 (12.16 MB)
2 -Example 1 Filter down penny stocks.mp4 (81.01 MB)
3 -Example 2 Filter stocks of companies that operate in the semiconductor industry.mp4 (48.08 MB)
4 -Example 3 Filter based on revenue growth.mp4 (18.63 MB)
5 -Example 4 Filter top 5 companies in terms of revenue growth.mp4 (39.07 MB)
6 -Example 5 Filter stocks (current daily closing $ daily closing $ 15 days ago).mp4 (29.99 MB)
7 -Example 6 Using 200-EMA to filter stocks.mp4 (14.63 MB)
8 -Example 7 Create SMA indicators for stocks entering the trading bot.mp4 (31.77 MB)
9 -Example 8 Updating indicators with consolidated data.mp4 (32 MB)
1 -Introduction.mp4 (24.86 MB)
2 -Example 1 Tiingo news with 1 stock.mp4 (105.42 MB)
3 -Example 2 Tiingo news with universe selection.mp4 (67.59 MB)
1 -Introduction.mp4 (15.57 MB)
2 -Example 1 Momentum trading strategy.mp4 (130.01 MB)
1 -Introduction.mp4 (28.19 MB)
2 -My recommendation.mp4 (2.28 MB)
1 -Introduction.mp4 (740.36 KB)
2 -Tips.mp4 (5.37 MB)
3 -Common mistakes.mp4 (12.87 MB)
1 -Introduction.mp4 (4.79 MB)
2 -Quick example of how to use variables to perform mathematical operations.mp4 (4.52 MB)
3 -Important notes about variables and how to use them.mp4 (30.04 MB)
1 -Introduction.mp4 (21.24 MB)
2 -Launch a trading bot for live trading.mp4 (54.81 MB)
1 -Introduction.mp4 (4.67 MB)
2 -Example 1 Send email and sms notifications when order submitted.mp4 (11.02 MB)
1 -Introduction.mp4 (1.83 MB)
2 -Important points about Interactive Brokers.mp4 (36.88 MB)
3 -Conclusion.mp4 (1.7 MB)
1 -Introduction.mp4 (59.29 MB)
10 -Example 9 Trading longer expiry options.mp4 (59.04 MB)
11 -Example 10 Selling option contracts.mp4 (96.59 MB)
12 -Example 11 Launching an options trading bot with IBKR.mp4 (89.36 MB)
13 -Example 12 Filter only call options.mp4 (13.85 MB)
2 -Example 1 Request for options.mp4 (56.06 MB)
3 -Example 2 Filter option contracts.mp4 (87.71 MB)
4 -Example 3 Access attributes of individual option contracts.mp4 (92.22 MB)
5 -Example 4 Working with options of multiple stocksETFs.mp4 (39.35 MB)
6 -Example 5 Trading options based on MACD crossover of underlying.mp4 (81.93 MB)
7 -Example 6 Stop trading and liquidate all positions at 355 PM.mp4 (37.69 MB)
8 -Example 7 Position sizing for options.mp4 (14.52 MB)
9 -Example 8 Take profit and stop loss.mp4 (14.63 MB)
1 -Introduction.mp4 (292.39 MB)
1 -Introduction.mp4 (7.68 MB)
2 -Example 1 Print "Hello world!" from a variable.mp4 (6.65 MB)
3 -Example 2 Print "Hello world!" directly.mp4 (5.84 MB)
4 -Upsides and downsides of print function.mp4 (17.97 MB)
5 -Important note about spaces.mp4 (9.34 MB)
1 -Introduction.mp4 (822.11 KB)
10 -Example 8 Converting float string to float.mp4 (6.58 MB)
11 -Example 9 len() function.mp4 (23.91 MB)
12 -Example 10 Index first character from string.mp4 (17.27 MB)
13 -Example 11 Index last character from string.mp4 (7.93 MB)
14 -Example 12 Index fourth character from string.mp4 (3 MB)
15 -Example 13 Index fourth to last character from string.mp4 (5.91 MB)
16 -Example 14 Index a character that does not exist.mp4 (6.29 MB)
17 -Example 15 Slice a string without its first character.mp4 (19.93 MB)
18 -Example 16 Slice a string without its last character.mp4 (6.48 MB)
19 -Example 17 Slice a string without its first and last character.mp4 (3.18 MB)
2 -What are methods in relation to functions.mp4 (14.18 MB)
20 -Example 18 Same as example 17 but with steps of 2.mp4 (5.45 MB)
21 -Example 19 Slicing the first 4 characters of a string.mp4 (4.52 MB)
22 -Example 20 Slice a string from the 4th to last index onward.mp4 (2.4 MB)
23 -Example 21 Slicing indexes that are not in the string.mp4 (6.59 MB)
3 -Example 1 lower() method.mp4 (4.86 MB)
4 -Example 2 upper() method.mp4 (2.92 MB)
5 -Example 3 Adding strings.mp4 (8.23 MB)
6 -Example 4 Multiplying strings.mp4 (6.91 MB)
7 -Example 5 Replacing strings after mathematical operation.mp4 (14.31 MB)
8 -Example 6 Compounding strings.mp4 (19.97 MB)
9 -Example 7 Converting integer string to integer.mp4 (8.32 MB)
1 -Introduction.mp4 (4.24 MB)
10 -Example 9 Compound with divisions.mp4 (2.32 MB)
11 -Example 10 Compound with exponent.mp4 (5.23 MB)
12 -Example 11 Compound with modulo.mp4 (2.25 MB)
13 -Example 12 Compound with floor division.mp4 (1.93 MB)
14 -Example 13 Shortcut to compounding.mp4 (4.24 MB)
15 -Example 14 Convert integer or float into a string.mp4 (7.74 MB)
16 -Example 15 Convert integerfloat into a string and add it to another string.mp4 (8.31 MB)
17 -Example 16 Convert float to integer.mp4 (2.93 MB)
18 -Example 17 Convert integer to float.mp4 (4.37 MB)
19 -Example 18 Getting the absolute value of an integer or float.mp4 (4.77 MB)
2 -Example 1 10 % 3.mp4 (11.59 MB)
20 -Example 19 Multiplying an integer with a float.mp4 (1.56 MB)
21 -Example 20 Multiplying an integer with an integer.mp4 (793.7 KB)
22 -Example 21 Multiplying a float with a float.mp4 (3.58 MB)
23 -Operator precedence.mp4 (14.48 MB)
3 -Example 2 17 % 7.mp4 (5.19 MB)
4 -Example 3 21 % 8.mp4 (3.03 MB)
5 -Example 4 10 3.mp4 (3.89 MB)
6 -Example 5 18 5.mp4 (1.75 MB)
7 -Example 6 Compound with addition.mp4 (4.53 MB)
8 -Example 7 Compound with subtractions.mp4 (2.77 MB)
9 -Example 8 Compound with multiplications.mp4 (1.34 MB)
1 -Introduction.mp4 (8.45 MB)
10 -Example 7 if elif.mp4 (7.44 MB)
11 -Example 8 if elif statements but both return False.mp4 (4.1 MB)
12 -Example 9 Multiple elif statements following an if statement.mp4 (3.63 MB)
13 -Example 10 Multiple elif statements following an if statement but.mp4 (4.64 MB)
14 -Example 11 if.elif.else.mp4 (4.65 MB)
15 -Example 12 Adding an and operator to an if statement.mp4 (14.26 MB)
16 -Example 13 Adding an or operator to an if statement.mp4 (6.81 MB)
17 -Example 14 and and or operators within 1 if statement.mp4 (14.82 MB)
18 -Example 15 pass statement after if statement.mp4 (11.01 MB)
2 -Example 1 Check if integer 10 is greater than integer 5.mp4 (7.55 MB)
3 -Important information about indentations.mp4 (15.29 MB)
4 -Important information about conditional statements.mp4 (11.37 MB)
5 -Example 2 Single nested if statement.mp4 (8.5 MB)
6 -Example 3 Multiple nested if statements.mp4 (3.98 MB)
7 -Example 4 Line after multiple nested if statements.mp4 (3.65 MB)
8 -Example 5 if else.mp4 (6.22 MB)
9 -Example 6 if.else statements nested within another.mp4 (2.61 MB)
1 -Introduction.mp4 (2.41 MB)
2 -Example 1 if.elif.else statements with comments.mp4 (7.16 MB)
3 -Example 2 Using the # symbol to comment out code for debugging.mp4 (24.54 MB)
Screenshot
RapidGator
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!