Free Download Corrosion-Deformation Interactions CDI '96 - CDI '96 in conjunction with EUROCORR '96 - By by Magnin, Thierry (Eds.)
1997 | 553 Pages | ISBN: 1861250487 | PDF | 32 MB
Includes the majority of the papers presented at CDI '96. The four sections deal with CDI in aqueous solutions, hydrogen-plasticity interactions, oxidation-plasticity interactions and CDI in the nuclear industry. Represents the current state of knowledge of the behaviour of a wide range of engineering materials subjected to deformation in corrosive environments as well as presenting prevailing views of the failure mechanisms. Content: Front Matter Series Introduction Preface Table of Contents Part I. CDI in Aqueous Solutions 1. What Do We Understand About Stress Corrosion Cracking in Aqueous Environments? 2. The Corrosion Enhanced Plasticity Model: Single Crystal Experiments and Numerical Simulations 3. Environment-Induced Deformation Localisation During the Early Stages of Transgranular Stress Corrosion Cracking in α-Brass 4. Selective Dissolution-Vacancy-Creep Model for EAC of Brass 5. Mechanistic Studies of the SCC Behaviour of Oriented Cu30Zn Single Crystals in NaNO2 Solutions 6. A Morphological Model for Quantitative Characterisation of Stress Corrosion Cracking 7. Corrosion-Deformation Interaction During SCC of Sensitised Stainless Steel 8. The Effect of the Transport Properties of the Crack Solution on Corrosion Fatigue Crack Growth Rates of Steel in Seawater 9. Some Features of Low Frequency Corrosion Fatigue on Type 316L Stainless Steel in MgCl2 at 117°C 10. Chemo-Mechanical Interactions During Cyclic Deformation of Nickel Polycrystals and Monocrystals 11. Transpassive Chromium Dissolution - Interaction with Stress Corrosion Cracking of Austenitic Stainless Steel in Caustic Solution 12. Corrosion Fatigue of Zircaloy-4 in Iodised Methyl Alcohol 13. Stress Corrosion Cracking of AlZn5Mg1 Alloy 14. Prediction of Stress Corrosion Cracking Susceptibility of Austenitic Stainless Steels in 50% CaCl2 Solution 15. Slow Strain Rate Testing of Aluminium Alloys Using Notched Tensile Specimens 16. Synchronised Current Analysis for Corrosion Fatigue of Iron 17. Influence of Heat Treatment and Welding on SCC and Intergranular Corrosion of a Duplex Stainless Steel Part II. Hydrogen-Plasticity Interactions 18. Mechanisms of Hydrogen Related Fracture - A Review 19. Hydrogen-Deformation Interactions in Iron and Nickel Base Alloys 20. A Commentary on Mechanisms of Environmentally Assisted Cracking 21. Hydrogen Interaction with Dislocations in Austenitic AISI 310 Stainless Steel 22. Hydrogen Effects on the Fracture of Thin Tantalum Nitride Films 23. Austenitic Stainless Steels and Nickel Base Alloys - Evaluation of Their Susceptibility to Hydrogen Induced Cracking 24. The Role of Hydrogen in Stress Corrosion Cracking of Duplex Stainless Steels 25. Embrittlement of Iron Aluminides by Hydrogen and Water Vapour 26. Stress Corrosion Crack Growth of Pipeline Steels in Simulated Ground Water 27. Change in Structure of Pipeline Steels Due to Subcritical Hydrogen Charging 28. Recent Progress in the Study of Transgranular SCC in Line Pipe Steels Part III. Oxidation-Plasticity Interactions 29. Oxidation-Deformation Interactions and Effect of Environment on the Crack Growth Resistance of Ni-base Superalloys 30. Stresses and Adhesion of Surface Scales 31. Residual Stresses in the Alumina Scale Developed on Some FeCrAl Alloys by High Temperature Oxidation 32. Fatigue Damage in a 316L Type Stainless Steel Induced by Superficial Oxide Layers 33. Some Aspects of Environmental Effects on the Fatigue Damage of the AM1 Single Crystal Superalloy at High Temperature 34. Influence of Pre-Oxidation on the Creep of Monocrystalline Nickel 35. Environment Dependence on Fatigue Crack Growth at 500°C in a Ti6246 Alloy 36. Effect of Air on Fatigue Crack Behaviour in Copper and Cu-9 at.% Al Bicrystals Part IV. CDI in the Nuclear Industry 37. On the Role of Oxygen in Stress Corrosion Cracking as a Function of Temperature 38. The Role of Surface Films on Alloy 600 Corrosion in Pressurised Water Reactors 39. Mechanisms of Environmentally-Enhanced Deformation and Intergranular Cracking of Ni-16Cr-9Fe Alloys 40. Effect of Heat Treatment on the Grain Boundary Chemistry and the Resistance to Intergranular Corrosion of Alloy 600 and Alloy 690 41. Study of the Mechanisms of Stress Corrosion Cracking of Alloys 600 and 690 in Primary Water Reactor Conditions 42. Determination of the High-Temperature Mechanical Behaviour of Alloy 600 in Air; Applicability to Stress Corrosion Cracking in PWR Primary Water 43. Environmentally Assisted Cracking of Alloy 600 in PWR Primary Water 44. Hydrogen Diffusion and Distribution in Alloy 600 and Related Effects on the Plasticity 45. Oxidation Embrittlement of Alloy 600 in Hydrogenated Steam at 400°C 46. Alloy 718 Behaviour in PWR Primary Water: SCC and Hydrogen Assisted Cracking 47. Strain Oxidation Cracking of Bimetallic Welds 48. A Critical Examination and Quantitative Evaluation of the Role of Corrosion-Deformation Interaction in Environmentally-Assisted Cracking List of Abbreviations Index
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
