Cisco Ccna 200-301 Labs Only Don'T Just Be A Paper Cert.
Published 3/2025
MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz
Language: English | Size: 10.18 GB | Duration: 17h 37m
Master All Devices Including Routers/Switches/Access Points/WLC And There Corresponding Protocols And Services.
What you'll learn
TCP/IP Addressing
What's The Purpose Of A Router And A Switch and Why Need It.
Setup Basic CLI Including HostName,Passwords,UserName,History Size,Banner,Encrypting Passwords.
Setting Direct and Remote (Telnet,SSH) Connections To Router And Switch.
How To Configure A DHCP Server. DHCP Relay And DHCP Snooping
NAT And Its Types and The Purpose Of NAT
Fault Tolerance To A Router By Configuring HSRP
How To Make The Router As A Firewall By Creating Access Lists.
What Is A Private Network VS A Public Network.
What is STP /RSTP (Preventing Network Loops)
How To Secure The Switch Using Port Security
What Are VLANS / InterVLAN Routing And VTP.
Channel Groups Using LACP/PAGP (Fault Tolerance For Cables).
What Is A Broadcast and Collision Domain.
How To Configure Static Routing / Floating Routes/ Default Routes.
What Is Dynamic Routing And How Its Applied Step By Step
When To Use More Than One Routing Protocol (RIP,EIGRP,OSPF).
What Is The Administrative Distance And Its Role On Choosing The Routing Protocol.
Requirements
Basic Computer/Network Skills
Description
About This Class ( My Entire Course is 100% HANDS ON)If you want to jumpstart your career in IT and networking by acing The CLI For Configuring Cisco Switches/Routers Than This Course Is For You.This is the one course you need Master The CLI. 100% Full lab Simulation is Covered so you'll get the hands-on practical skills as you are working on real world networks.Why This ClassThis Short Course Will be the same as You worked as a Junior Network Engineer For a Company For at least 2 Years. This Class Will be The same as You were Setting Up Cisco Routers And Switches In a Real Environment.What Will You Gain From This ClassThis course will teach you and enhance your skills in better understating by actually doing it as we were in the same classroom utilizing Cisco Routers And Switches using Cisco Packet Tracer.In This Course you will not just learn you will actually do it yourself as if you were in an actual company and here are the key topics that you will gain from this class.1) IP Addressing /(Public, Private Networks) /Subnetting/ (TCP,UDP Ports)2) What's The Purpose Of A Router And A Switch and Why Need It.3) Setup Basic CLI Including HostName,Passwords,UserName, History Size,Banner,Encrypting Passwords.4) Setting Direct and Remote (Telnet,SSH) Connections To The Router.5) Configuring IP Address/Description/Duplex/Speed To Interfaces.6) Basic To Advanced Router CLI. (Learn CLI From Zero To Hero).7) How To Break(Hack) Into The Router And A Switch.8) Backup And Restore Router /Switch Config and IOS To And From A TFTP Server.9) Setup A Banner For The Router And A Switch10) What is A MAC Address Table And A Routing Table.11) What Is an NTP Server.12) What Is AAA.13) How To Configure And Manage DHCP Server On A Router14) What is A DHCP Relay and How It Works15) When Do You Need DHCP Snooping.16) NAT Configuration And Its Types (Static NAT, Dynamic NAT, PAT).17) How Can We Filter Traffic Based on Access Lists And The Types. (Standard,Extended,Named)18) How Can We Provide Fault Tolerance For A Router (HSRP).19) Understanding Of The TCP/IP Classes (Private And Public Networks).20) How To Configure And Manage A Cisco Switch For Direct And Remote (Telnet,SSH) Connections.21) How To Secure The Switch Using Port Security22) What's The Purpose Of The VLANS And How To Route Between Different VLANs (Inter VLAN Routing).23) When Do I need VTP and Its Importance on Large Scale Network.24) What is an EtherChannel and Its Types (LACP,PAGP).25) What is Trunking and Its Purpose On The Switch26) What is The Difference between a Switch and a Layer3 Device (Multilayer Switch).27) What is The Difference between a Switch and a Hub.28) TCP/IP Addressing And Subnetting.29) What Are Switch Loops And How To Prevent Them Using STP/RSTP.30) How To Configure Routing Between Different Sites31) Configure Static Routing / Floating Routes And Default Routes32) What is The Difference between Dynamic and Static Routing and When To Use.33) Configure Dynamic Routing Protocols (RIP,OSPF,EIGRP)34) What Is The Wild Card Mask and Why Important For Some Routing Protocols.35) How Can We Provide Fault Tolerance For Routing Protocols.36) What Is TCP/IP And Its Classes 37) What's The Difference Between Classful and Classless Networks 38) Learn Subnetting.39) How To Secure Routing Protocol.40) How To Configure And Manage DHCP Server On A Router41) What is A DHCP Relay and How It Works42) When Do You Need DHCP Snooping.43) NAT Configuration And Its Types (Static NAT, Dynamic NAT, PAT).44) How Can We Filter Traffic Based on Access Lists And The Types. (Standard,Extended,Named)45) How Can We Provide Fault Tolerance For A Router (HSRP).46) Understanding Of The TCP/IP Classes (Private And Public Networks).Who is This Class For 1) Network Engineers /System Administrators.2) IT Support Techs.3) Help Desk Analyst.4) Any One Who wants to get themselves in The IT Field.Facts About The CourseDo I need any Work experience?If You or Don't Work In The IT Field You Should Be Fine Taking This Course.Will I Get Support From You?Yes You will.I Already Work In The IT Field Will I Benefit From This Course?Working In The IT Field Doesn't Mean You Will Cover All Concepts Of Networking.Will I get a certificate of completion at the end?Yes You Will.
Overview
Section 1: Introduction To The Course.
Lecture 1 Introduction To Cisco Routers And Switches.
Section 2: Setup Your Environment For Cisco Routers Lab (Cisco Packet Tracer).
Lecture 2 Download And Install Cisco Packet Tracer.
Section 3: Routers And Switches Broadcast/Collision Domains And Cable Types.
Lecture 3 What Is The Purpose Of A Router And Switch.
Lecture 4 What Type Of Cables Are Out There.
Lecture 5 What Is The Difference Between A Broadcast And Collision Domain.
Lecture 6 What is A Multi Layer Switch (MLS)
Lecture 7 HUBS vs Switches
Section 4: TCP/IP Addressing And Ports.
Lecture 8 Overview Of All TCP/IP Classes and How Binary and Decimal Work (Part1).
Lecture 9 Overview Of All TCP/IP Classes and How Binary and Decimal Work (Part2).
Lecture 10 Class C
Lecture 11 Class B
Lecture 12 Class A
Lecture 13 Classes D And E
Lecture 14 The Difference Between TCP And UDP Ports. (Part1)
Lecture 15 The Difference Between TCP And UDP Ports. (Part2)
Lecture 16 The Difference Between TCP And UDP Ports. (Part3)
Section 5: Cisco Router Basic Commands (Learning The CLI From Scratch). Part1.
Lecture 17 Routers Mode (User,Privilage,GlobalConfig,Interface,Subinterface and Line).
Lecture 18 Difference Between The Enable Password and Enable Secret And How To Set Them Up
Lecture 19 Change The Hostname and Change Date, Time and The Time Zone.
Lecture 20 Change The History Size and Display The History.
Lecture 21 Storage Types Of The Router.(RAM,NVRAM,FLASH).
Section 6: Cisco Switch Basic Commands (Learning The CLI From Scratch). Part1
Lecture 22 Hostname, Enable Secret, Date Time, History Size And Disable IP Domain Lookup
Lecture 23 Interface Config (Duplex,Speed,Description,Display And Shut Down Ports).
Lecture 24 The MAC Address Table
Lecture 25 Storage Types Of The Switch.(RAM,NVRAM,FLASH)
Section 7: Cisco Router Basic Commands (Learning The CLI From Scratch).Part2
Lecture 26 Interface Config (IP Address,Description,Duplex,Speed)
Lecture 27 Setup A Time Server (NTP).
Lecture 28 Disable IP Domain Lookup, Name Server, Domain Name.
Section 8: Cisco Router Basic Commands (Learning The CLI From Scratch). Part3
Lecture 29 Configure The Console Line (Direct Connection).
Lecture 30 Configure The VTY Line (Remote Connection Telnet)
Lecture 31 Configure Usernames For Console and Telnet.
Lecture 32 How To Encrypt The Passwords.
Lecture 33 Configure The VTY Line (Remote Connection SSH)
Lecture 34 Setup A Banner For The Router.
Section 9: Cisco Switch Basic Commands (Learning The CLI From Scratch). Part2
Lecture 35 Configure The Console Line (Direct Connection).
Lecture 36 Configure The VTY Line (Remote Connection Telnet)
Lecture 37 Configure Usernames For Console and Telnet.
Lecture 38 Configure The VTY Line (Remote Connection SSH)
Lecture 39 Setup A Banner For The Switch.
Section 10: What Is TACACS+,RADIUS (AAA Centralized Server) For Routers And Switches.
Lecture 40 TACACS+ Configuration.
Section 11: Maintain The Router And The Switch Startup Config and The IOS.
Lecture 41 Backup The Router And The Switch Config and IOS To A TFTP Server.
Lecture 42 Restore The Router And The Switch Config From TFTP Server.
Lecture 43 Breaking Into The Router And The Switch.
Section 12: CDP And LLDP (How To Discover Who Are Your Neighbors).
Lecture 44 Configure CDP and LLDP.
Section 13: TCP/IP Subnetting (Classless Networks)
Lecture 45 Subnetting Class C Part1
Lecture 46 Subnetting Class C Part2
Lecture 47 Reverse Engineer A Class C Subnet
Lecture 48 Subnetting Class B Part1
Lecture 49 Subnetting Class B Part2
Lecture 50 Reverse Engineer A Class B Subnet
Lecture 51 Subnetting Class A Part1
Lecture 52 Subnetting Class A Part2
Lecture 53 Reverse Engineer A Class A Subnet
Section 14: Securing Switch Ports Using Port Security.
Lecture 54 Switch Ports Without Port Security
Lecture 55 Switch Ports Using Port Security Part1
Lecture 56 Switch Ports Using Port Security Part2
Lecture 57 Switch Ports Using Port Security Part3
Lecture 58 Switch Ports Using Port Security Part4
Lecture 59 Switch Ports MAC Address Table
Section 15: Segmenting The Network Using VLANs.
Lecture 60 Switches Without VLANS.
Lecture 61 Switches With VLANs Part1.
Lecture 62 Switches With VLANs Part2.
Lecture 63 Switches With VLANs Part3.
Lecture 64 Switches With VLANs Part4.
Section 16: Routing Between Different VLANs. (Inter Vlan Routing).
Lecture 65 Routing Between Different VLANS Using A Router (Router On A Stick). Part1
Lecture 66 Routing Between Different VLANS Using A Router (Router On A Stick). Part2
Lecture 67 Routing Between Different VLANS Using A Router (Router On A Stick). Part3
Lecture 68 Routing Between Different VLANS Using A Multilayer Switch. Part1
Lecture 69 Routing Between Different VLANS Using A Multilayer Switch. Part2
Section 17: VTP And Its Relation To VLANs.
Lecture 70 VTP Types (Client,Server,Transparent). Part1
Lecture 71 VTP Types (Client,Server,Transparent). Part2
Lecture 72 VTP Types (Client,Server,Transparent). Part3
Section 18: Preventing Switch Loops Using STP/RSTP.
Lecture 73 STP
Lecture 74 RSTP
Section 19: Fault Tolerance For Cables (EtherChannel) Using LACP/PAGP.
Lecture 75 LACP
Lecture 76 PAGP
Section 20: Static, Default And Floating Routes.
Lecture 77 Working With One Router (Default Routing).
Lecture 78 Two Routers (Static Routing). (2 Sites For Same Company).
Lecture 79 Three Routers (Static /Default). (3 Sites For Same Company).
Lecture 80 Five Routers (Static/Floating). (5 Sites For Same Company). Part1
Lecture 81 Five Routers (Static/Floating). (5 Sites For Same Company). Part2
Section 21: Dynamic Routing (RIP,OSPF,EIGRP).
Lecture 82 Setting UP RIPV1
Lecture 83 Setting UP RIPV2
Lecture 84 Setting UP OSPF Lab1
Lecture 85 Setting UP OSPF Lab2
Lecture 86 Setting UP OSPF Lab3
Lecture 87 Setting UP OSPF Lab4
Lecture 88 Setting UP OSPF Lab5
Lecture 89 Setting UP OSPF Lab6
Lecture 90 Setting UP OSPF Lab7
Lecture 91 Setting UP EIGRP Lab1.
Lecture 92 Setting UP EIGRP Lab2
Lecture 93 Setting UP EIGRP Lab3
Section 22: DHCP
Lecture 94 Setup DHCP On A Router For One Broadcast (One Network).
Lecture 95 Setup DHCP On A Router For Two Broadcast (Two Networks).
Lecture 96 Setup A DHCP Relay And What Its Purpose.
Lecture 97 Setup DHCP On One Server.
Lecture 98 Setup DHCP On Multiple Servers.
Lecture 99 What Is DHCP Snooping And How Does It Work.
Lecture 100 Setup DHCP For Multiple VLANs.
Section 23: Fault Tolerance For The Router (HSRP,VRRP,GLBP).
Lecture 101 A Typical Topology Without Fault Tolerance. (One Router).
Lecture 102 A Topology With Fault Tolerance (Two Routers).
Lecture 103 A Topology With Fault Tolerance (Two Routers Using HSRP) Part1
Lecture 104 A Topology With Fault Tolerance (Two Routers Using HSRP) Part2
Section 24: Making Your Router As A Firewall (Access Lists)
Lecture 105 Access List Types (Standard,Extended,Named) And The Rules.
Lecture 106 Standard Access List Part1
Lecture 107 Standard Access List Part2
Lecture 108 Standard Access List Part3
Lecture 109 Standard Access List Part4
Lecture 110 Extended Access List Part1
Lecture 111 Extended Access List Part2
Lecture 112 Extended Access List Part3
Lecture 113 Extended Access List Part4
Lecture 114 Named Access List
Section 25: NAT (Static NAT, Dynamic NAT,PAT).
Lecture 115 What Is a Public And Private Network.
Lecture 116 Static NAT
Lecture 117 Dynamic NAT
Lecture 118 PAT
Section 26: Securing WIFI Networks
Lecture 119 Setting A WIFI Network For SOHO
Lecture 120 Setting A WIFI Network For Enterprise
Section 27: Final Thoughts
Lecture 121 In A NutShell
Network Engineer/Admin,IT Support Specialist,Help Desk Tech,Any One Who Wants To Enter The Cisco World
TurboBit
RapidGator
AlfaFile
FileFactory
