Free Download 22nd Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: B: Ceramic Engineering and Science Proceedings, Volume 19, Issue 4 By
1998 | 559 Pages | ISBN: 0470294493 | PDF | 47 MB
This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.Content: Chapter 1 The Effect of High Temperature Soaking on the Microstructure and Properties of a Sintered Silicon Nitride (pages 3-10): Q. Wei, J. Sankar, V. Vijayrao and J. NarayanChapter 2 Environmentally Induced Time?Dependent Failure Mechanisms in Cfccs at Elevated Temperatures (pages 11-18): C. A. Lewinsohn, C. H. Henager and R. H. JonesChapter 3 High Temperature Oxidation and Corrosion of a Porous Si2N2O?ZrO2 Composite Material (pages 19-27): Maiken Heim, Jiaxin Chen, Colette O'Meara, Refael Gatt and Robert PompeChapter 4 Low Damage, High Productivity Abrasive Grinding of Ceramics (pages 28-36): Robert Sabia, Victor A. Greenhut, Dale E. Niesz, Ping Tang, Ruilin Zeng and Ioan MarinescuChapter 5 Effect of Crystallization on Creep of Clay Bonded Sicfilters (pages 37-44): Pirjo H. Pastila, Vesa Helanti, Antti?Pekka Nikkila and Tapio A. MantylaChapter 6 Wear Performance of Monolithic and Composite Mixing Tubes for Abrasive Water Jet Cutting of Ceramics (pages 45-54): M. Ramulu, M. G. Jenkins, T. L. Stevens and J. A. SalemChapter 7 Reliability Modeling of Brittle Anisotropic Materials (pages 56-64): Jonathan Salem, Ronald Noebe and Jane ManderscheidChapter 8 A Strain?Based Methodology for High Temperature Lifetime Prediction (pages 65-78): S. M. Wiederhorn, W. E. Luecke and R. F. KrauseChapter 9 Investigations of the Weibull Modulus as a Function of Stressing Rate (pages 79-87): M. J. Andrews, A. A. Wereszczak, K. Breder, M. K. Ferber and T. P. KirklandChapter 10 Exploration of the Weibull Modulus as a Function of Surface Preparation and Flexure Testing Conditions (pages 89-97): Kristin Breder, Andrew A. Wereszczak and Mark J. AndrewsChapter 11 Lifetime Prediction for Ceramic Components Subjected to Time?Dependent Loading (pages 99-106): Angelika Bruckner?Foit and Christian ZieglerChapter 12 Prediction of the Load?Bearing Capabilities Based on the First Matrix?Cracking Criterion for Plainweave Multilayered Nicalon/SiC Composites with lay?Ups of [0/20/60] and [0/40/60] (pages 107-116): Wei Zhao, Peter K. Liaw and Niann?I YuChapter 13 Life Prediction Tool for Ceramic Matrix Composites at Elevated Temperatures (pages 117-124): Scott Case, Nirmal Iyengar and Ken ReifsniderChapter 14 Experimental Study and Modeling of a Novel Ceramic Composite Hot Gas Candle Filter Material (pages 125-132): Xinyu Huang, Rob Carter and Ken L. ReifsniderChapter 15 Bridging Behavior at Creep Regime (pages 134-142): S. B. BinerChapter 16 Oxygen Diffusion and Reaction Kinetics in Continuous Fiber Ceramic Matrix Composites (pages 143-150): Michael C. Halbig, Andrew J. Eckel and James D. CawleyChapter 17 Prediction of Tension Failure of Textile Composite Using Micro?Mechanics and Statistical Analysis (pages 151-158): Y. Shi, M. F. Card, V. V. Raman and R. M. V. MurthiChapter 18 The Effects of Load, Grain Size, and Grain Boundaries on the Hardness of Alumina (pages 159-168): Andreas KrellChapter 19 Computational Analysis of Residual Stress in Ceramics Having Heterogeneous Microstructure (pages 169-176): Yoshihisa Sakaida, Akira Okada, Keisuke Tanaka, Yoshiyuki Yasutomi and Hiroshi KawamotoChapter 20 Finite Element Modeling of Thermal Residual Stress in Tungsten/Tungsten?Carbide Composites (pages 177-184): Kai Wang and Robert R. ReeberChapter 21 Finite Element Analysis of the Stress Distribution in Silicon Nitride Bearing Balls (pages 185-192): Y. L. Tsai, J. J. Mecholsky and H. A. ChinChapter 22 Finite Element Analysis of Crack Wake Tractions in Chevron?Notched Bend Bar (pages 193-201): G. Reza Sarrafi?Nour, Theo Fett and Thomas W. CoyleChapter 23 Analysis of the Bridging Zone Contribution to the R?Curve Behavior of Sic?Platelet?Reinforced Alumina Using the Chevron?Notched Bend Bar Specimen (pages 203-211): G. Reza Sarrafi?Nour and Thomas W. CoyleChapter 24 Fabrication of NZP Ceramic?Metal Composite Diesel Engine Exhaust Port Liners Using Finite Element Analysis as a Guiding Tool (pages 214-223): R. Nageswaran, J. J. Cassell, S. Y. Limaye and D. StintonChapter 25 Finite Element Modelling and Analysis of a Ceramic Matrix Composite Combustor (pages 225-232): J. Shi and P. D. AndrewChapter 26 Joint Integrity Issues in a Novel Piezoceramic Actuator Design (pages 233-240): T. L. Jessen, R. J. Rayne, B. A. Bender, L. D. Flippen and C. KimChapter 27 Manufacturing of Ceramic Matrix Composite Rotor for Advanced Gas?Generator (pages 241-248): Takahito Araki, Nobuyuki Suzumura, Shoju Masaki, Tadashi Natsumura, Masakazu Onozuka, Hisaichi Ohnabe and Koichi YasuhiraChapter 28 Design and Analysis of a CMC Turbine Blade Tip Seal for a Land?Based Power Turbine (pages 249-256): J. A. Momson and K. M. KauthChapter 29 Degradation of SiC/BN/SiC Composite in the Burner Rig (pages 257-264): Linus U. OgbujiChapter 30 Rudimentary CFCMC Design and Mechanical Behavior Prediction (pages 265-272): T. L. Jessen and A. KeeChapter 31 Alumina Single?Crystal Fibre Reinforced Alumina Matrix for Combustor Tiles (pages 273-280): O. Sudre, A. G. Razzell, L. Molliex and M. HolmquistChapter 32 Strength Measurement of Thick Brittle Coatings on Metals (pages 282-291): O. Unal, D. J. Sordelet, D. J. Barnard and M. AkincChapter 33 High?Temperature Slow Crack Growth, Fracture Toughness and Room?Temperature Deformation Behavior of Plasma?Sprayed ZrO2?8 WT % Y2O3 (pages 293-301): Sung R. Choi, Dongming Zhu and Robert A. MillerChapter 34 Dust Erosion Testing of Coated Aetb Tile for Aerospace Applications (pages 303-310): Edmund H. Moore and Richard A. SmithChapter 35 Thermomechanical Behavior of Plasma?Sprayed Zirconia Thermal Barrier Coatings (pages 312-321): J. P. Singh, M. Sutaria and A. ChopraChapter 36 Damage Behavior and Residual Fatigue Bending Strength of Impact?Induced CFRP Composites (pages 323-328): Kwang?Hee Im and In?Young YangChapter 37 Ultrasonic Nondestructive Evaluation of Carbon/Cafwon Brake Disks (pages 329-334): Kwang?Hee Im, David K. Hsu and Hyunjo JeongChapter 38 In Sztu Observation of Stable Crack Propagation in Senb Specimens for R?Curve Evaluation (pages 335-340): Kyoji Hiramatsu, Akira Okada and Hatsuhiko UsamiChapter 39 Irradiation Creep of Advanced Sic?Based Fibers (pages 341-346): G. E. Youngblood, R. H. Jones, G. N. Morscher, R. Scholz and A. KohyamaChapter 40 Active Metal Brazing of Si3N4 to Metals (pages 347-354): Maiken Heim, Luiz A. B. Tessarotto and Victor A. GreenhutChapter 41 Uniformity in Microwave Processed Al2O3?ZrO2 Composite Bars (pages 355-360): Greg Darby and David E. ClarkChapter 42 Evolution of Phases in MoSi2?TiB2 Composites Produced by Displacement Reactions (pages 361-366): L. A. Dempere and M. J. KaufmanChapter 43 Effects of Silicon Carbide Structure on the Microwave Properties of Silicon Carbide/Alumina Cement Susceptors (pages 367-372): K. S. Leiser and D. E. ClarkChapter 44 Foreword (page 375): Kathryn V. Logan, Zuhair A. Munil and Richard M. SprigsChapter 45 Processing, Deformation, and Fracture of Ni?Al2O3 Composites with and Without Graded Microstructures (pages 378-386): Andrew N. Winter, Brian A. Corff, Ivar E. Reimanis and Barry H. RabinChapter 46 Functionally Graded Boron Carbide (pages 387-393): J. J. Petrovic, K. J. McClellan, C. D. Kise, R. C. Hoover and W. K. ScarboroughChapter 47 High Temperature Plasticity in the ZrO2?Y2O3 System (pages 395-406): Arturo Dominguez?Rodriguez, Diego Gomez?Garcia and Manuel Jimenez?MelendoChapter 48 Dynamic Compression Behavior of a Hot Pressed TiB2?Al2O3 Ceramic Composite from SHS?Powders (pages 407-414): Jean?Marcel JametChapter 49 Synthesis of Tic - Al2O3 Composites Using Microwave?Induced Self?Propagating High Temperature Synthesis (SHS) (pages 415-421): Duangduen Atong and D. E. ClarkChapter 50 Mechanical Properties of Melt?Derived Erbium Oxide (pages 423-429): A. D. Neuman, M. J. Blacic, M. Platero, R. S. Romero, K. J. Mcclellan and J. J. PetrovicChapter 51 Amorphous and Nanocrystalline Diamond Synthesized by Scarq: Shock Compression and Rapid Quenching (pages 432-444): Ken?Ichi Kondo, Hisako Hirai and Masatake YoshidaChapter 52 Effect of Al2O3 Phase Transformations on Gram Growth in ZrO2?Al2O3Nanocomposites (pages 445-452): B. M. Smyser and R. D. SissonChapter 53 Effects of Gas Pressure Sinteking Conditions in Si3N4?Nano SiC Composite on Tribological Behavior (pages 453-460): S. W. Lee and S. H. KimChapter 54 A Novel Process for Synthesizing Nanostructured Carbides: Mechanically Activated Synthesis (pages 461-468): Ruiming Ren, Zhenguo Yang and Leon L. ShawChapter 55 Preparation of Ceramic Powders by a Solution?Polymerization Route Employing PVA Solution (pages 469-476): Sang?Jin Lee and Waltraud M. KrivenChapter 56 Microstructure - Electrical Transport Correlation in Ceramic Oxide Thin Films (pages 477-489): Igor Kosacki and Harlan U. AndersonChapter 57 Mechanical Properties of Nanocrystalline MgAl2O4and its Composites (pages 491-498): S. Bhaduri, S. B. Bhaduri and C. H. HenagerChapter 58 Nano?SiC Dispersed Si3N4 Composite Sintered by Pulsed Electric Current Method (pages 499-506): Yoshiaki Kinemuchi and Kozo IshizakiChapter 59 Syntheses of Alkaline Earth Aluminatelzirconia Composites from Metal?Bearing Precursors (pages 507-514): Kirk A. Rogers, Ramazan Citak, Pragati Kumar and Ken H. SandhageChapter 60 Microwave?Induced Decomposition of Ceramic Oxides to Form Unique Composites (pages 516-523): R. R. Di Fiore and D. E. ClarkChapter 61 Effect of Geometry on CVI with RF Heating (pages 526-534): Vikas Midha and Demetre J. EconomouChapter 62 Novel Applications of Atmospheric Pressure Chemically Vapor Deposited Materials and Methods for Control (pages 535-540): Terence J. ClarkChapter 63 Thermodynamic Modeling of the Ti?Si?C?H?CI?Ar Systemto Determine Optimum Conditions for Chemical Vapor Deposition of Ti3SiC2 (pages 541-552): E. Pickering, W. J. Lackey and S. CrainChapter 64 Net?Shape Manufacture of Low?Cost Ceramic Shapes by Freeze?Gelation (pages 553-558): M. J. Statham, F. Hammett, B. Hanis, R. G. Cooke, R. M. Jordan and A. RocheChapter 65 Al2TiO5 - New Contributions to its Preparation Via the Sol?Gel Technique (pages 559-565): Stefan Tudyka, Karl Pflanz, Norbert Stroh, Fritz Aldinger and Herwig BrunnerChapter 66 Design of Self?Diagnosis In/with Compsite Matertals (pages 567-577): Hiroaki Yanagida
Code:
Bitte
Anmelden
oder
Registrieren
um Code Inhalt zu sehen!
